John Deere 1023E
Sub-Compact Tractor
- Powerful Final Tier 4-compliant diesel engine
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
View Special Offers
Features
1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
- AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
- Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
- Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
- Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
- iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
- Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
- Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.
The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
- Ideal for loader or mower applications where frequent direction and speed changes are needed
- No clutching for fast direction changes
- Match the job at hand with infinite ground speeds
Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
- Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
- Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
- High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
- The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
The 1023E open operator station is designed for greater comfort and increased visibility.
Comfortable operation
- Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise.
- Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side.
- Controls are conveniently located next to the fenders and are color-coded for quick identification.
- Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
- Foldable rollover protective structure (ROPS) keeps you protected during operation and improves the ability to store tractor in a garage.
Foldable Roll-Gard™ ROPS is standard equipment on 1023E.
Increased visibility
- Sloping hood design provides improved visibility especially during front loader work
- Standard lighting equipment allows you to work from early in the morning to late at night:
- Two front-mounted sealed-beam halogen headlights
- Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
- Built-in tail light on one warning/hazardous light
- Additional front- and rear-light kits are available
Instrumentation
Updated instrumentation is standard equipment for operating convenience and confidence. Instrumentation includes:
- Tach/hour meter
- Oil-pressure indicator light
- Alternator-indicator light
- Flashing-warning lights
- Coolant-temperature light
Suspension seat
The spring suspension seat adjusts fore/aft for operator convenience. The seat adjustment lever is located in the center under the seat area. The seat flips forward for protection from the elements.
Mower deck height-adjustment knob
- The mower deck height-adjustment knob allows the mower height to be adjusted from 2.5 cm to 10.2 cm (1 in. to 4 in.).
- A spring-loaded detent ensures the height position is locked into place.
- The transport lock position holds the deck 10.2-cm (4-in.) from the ground, so that rear implements can be used separately while the mower is installed.
Beverage holder and additional storage
The beverage holder is contour-molded and seated into the fender for a clean look. It is conveniently located and dual-sized to accommodate many containers. The placement of the cup holder is within arm's reach.
Additional storage is conveniently placed into the fender for loose items like keys and work gloves.
Fuel fill and fuel gauge locations
The fuel fill location is conveniently accessible on the left-hand side fender. The fuel gauge is located in close proximity to make the fuel refilling process easier.
Mid-mower lift system options
Standard mechanical mower lift
The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.
Optional hydraulic mower lift
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.
Optional independent hydraulic mower lift
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.
For more information on this mid mower lift system click here.
Specs & Compare
Key Specs | 1023E Current Model |
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
Power take-off (PTO) power | 11.1 kW 14.9 hp |
Steering hydraulics | 13.2 L/min 3.5 gpm |
Implement hydraulics | 13.2 L/min 3.5 gpm |
Hitch type | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Standard transmission; forward/reverse | Hydrostatic - two range |
Cruise control | No |
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
Wheelbase | 1450 mm 57.1 in. |
Engine | |
Family | |
Manufacturer | Yanmar® |
Engine model | 3TNM74F-NCJT |
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
Power take-off (PTO) power | 11.1 kW 14.9 hp |
Rated engine speed | 3200 rpm |
Type | Diesel |
Injection pump type | Indirect injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | Three cylinders: 0.993 L 60.6 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 74 x 77 mm 2.91 x 3.03 in. |
Compression ratio | 23.5:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 47.7 Nm 35.2 lb-ft |
Fuel tank capacity | 24 L 6.3 U.S. gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 40 amp |
Starter size | 1.2 kW 1.6 hp |
Fuel system | |
Type | Indirect injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic - two range |
Optional transmission; forward/reverse | |
Left-hand reverser | No |
Transmission gear ranges | |
Final drive | Spur gear |
Brakes | Wet disc (left-hand pedal) |
Steering | Power |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 612 kg 1349 lb Rear 715 kg 1576 lb |
Creeper | No |
Cruise control | No |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
Pump type | Single gear |
Maximum operating pressure | 138 bar 2000 psi |
Draft control sensing | Select control |
Remote control valves available | Three |
3-point hitch | |
Type | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Power take-off (PTO) | |
Standard | Rear: 540 rpm Mid: 2100 rpm |
Optional | |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 2.7 L 2.9 gal. |
Transmission and hydraulic system | 12.3 L 3.2 gal. |
Final drive | |
Type | Spur gear |
Differential lock | Yes |
Operator station | |
Rollover protective structure | Type Foldable Yes |
Platform - flat/straddle | One-piece semi flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | |
Visibility | |
Air conditioning, temperature differential | |
Doors | |
Noise rating | |
Seat equipment | |
Dimensions | |
Height | |
Wheelbase | 1450 mm 57.1 in. |
Front axle clearance | 195 mm 7.7 in. |
Turning radius with brakes | |
Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
Limited slip differential | No |
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
Tires | |
Front | R3 Turf: 18x8.50-10 R4: 18x8.5-10 |
Rear | R3 Turf: 26x12-12 R4: 26x12-12 |
Front tread range | 931 mm 36.7 in. |
Rear tread spacing | 895 mm 35.2 in. |
Miscellaneous | |
Toolbox | Yes |
Tilt steering wheel | |
12-V Outlet | |
Additional information | |
Offers & Discounts
Reviews
Location: Henrico VA
Length of Ownership: 1yearOrLonger
Usage: Daily
I have had this tractor since 2014. I do the regular maintenance and keep it looking new. Runs like it should and does everything I need it to do. I love this tractor and now all I need is the backhoe to make it complete for my other needs of digging up stuff and making some holes. I have pulled things out of the ground stumps, poles ect with no issues.
Location: Conway, AR
Length of Ownership: 1yearOrLonger
Usage: Weekly
You would have to see it to believe it! I have dug up trees with the front end loader that was 18" ~ 24" in diameter. I've cleared my 5 acres with this little tractor and have not had any problems. I've moved trucks load of dirt also this last year, and I will tell you it is a beast for what it is!
Location: Maine
Length of Ownership: 1month
Usage: Weekly
I will never buy anything but John Deere. Purchased my 1023E a few weeks ago and very satisfied with it.
Location: Pennsylvania
Length of Ownership: 1yearOrLonger
Usage: Weekly
I bought my John Deere 2305 maybe 20 years ago and it has been a very reliable tool for everything I have asked of it. Love the front mount snowblower too. A little maintenance goes a long way to keep it running and looking good. The attachments—54 in mower deck and the very large leaf bagger make fall clean up way better than anything I have ever tried. All in all I have been very happy with it.
Location: La Habra Heights, California
Length of Ownership: 1yearOrLonger
Usage: Weekly
We bought our 1023e (kids named it Scoop) in spring of 2020 to do earthmoving on our hillside mini farm in LA area. We use it for moving and leveling dirt monthly, but also it gets used for about a million other things we WEREN’T expecting to use it for. We move & stack railroad ties for retaining walls, tow farm wagons, push/pull old cars around, and generally use it as a mule around the property. The amount it has saved us on hiring contractors and renting equipment has already covered it’s cost—especially after a couple big rains where we had to clear mud flows and move fallen trees.
Location: Pooler Georgia
Length of Ownership: 1yearOrLonger
Usage: Weekly
Bought mine in 2014 have had no problems at all! Some features I hope have changed since then. Light switch position,better seat, front axle vent standard. Price could come down closer to other top brand tractors! Dealers should give actual dates tractors for manufactured. Mine was 2 years older than I thought.
Location: Six Mile, SC
Length of Ownership: 1yearOrLonger
Usage: Weekly
We bought this tractor two years ago and it has been a great asset to the farm. We have the auger attachment and the mowing deck; both have made our lives so much easier. Our only regret is not getting the loader bucket too! But that is on our list to buy.
Location: Johnstown, Pennsylvania
Length of Ownership: 1yearOrLonger
Usage: Daily
I bought my John Deere 1023e in the spring of 2021 for doing yard work and for snow removal. This is a good working little tractor. This is great for small to medium properties. Very easy to operate.
Location: Kingsville, Ohio
Length of Ownership: 1yearOrLonger
Usage: Weekly
I’ve had my 1023 about a year now. Bought it used with 300 hours and put nearly 200 on it in a year with little to no issues. Does everything I need it to do with ease and is very reliable. Green is the way to go!
Location:
Length of Ownership: 1yearOrLonger
Usage: Weekly
This tractor maybe one of the smallest, but don't let it turn you away. I've hoisted pickup truck cabs and also 8ft pickup truck beds with no issue. Great hard working machine and will do pretty much anything I need around the house.